RepliCase™ Hip
Cement spacer mold
Product Overview
RepliCase™ Hip is used for molding a temporary hip prosthesis during surgery, which helps surgeons model a temporary hip prosthesis more easily.
Downloads
Key Features
- A set of instruments for easily replicating the hip cement spacer
- 3 sizes available (S, M, L)
- Molds made from medical-grade silicone, allowing for repeated sterilisation
Note: Bone cement and antibiotics are NOT provided.
For an acetabular size smaller than 50 mm, an acetabular cup may not be necessary; the size choice should be based on the head diameter.
At least two batches of bone cement are required for the femoral spacer. The amount of bone cement needed for the spacing cup depends on the acetabular size and bone defect.
The cement used should be of high viscosity.
Surgical Procedure
1. Size Selection
2.
3.
4.
5.
Specifications
| Size | S | M | L |
|---|---|---|---|
| Acetabular Diameter (mm) | 46 | 49 | 52 |
| Head Diameter (mm) | 42 | 45 | 48 |
| Offset (mm) | 36 | 39 | 43 |
| Head/Neck Angle | 130° | 130° | 130° |
| Stem Length (mm) | 145 | 145 | 145 |
| Distal Diameter (mm) | 9 | 10 | 11 |
About us
United Orthopedics Limited, suppliers for Taiwan based leading international designer, manufacturer & distributor of innovative regulatory compliant orthopaedic implants.
