United Orthopedic Corporation

4. Select the appropriate length and diameter stem that was used for the femoral trial. 5. Insert the stem extension implant into the offset adaptor and/or femoral component implant, and protect the stem by placing the Stem Impactor on the tip of the stem. 6. Impact on the impactor solidly twice to ensure the taper lock is properly engaged. 7. After the stem has been impacted into the femoral component, insert the femoral screw into the intercondylar hole. 8. Utilize the assembly of the Screw Driver Adaptor and Driver Handle , then apply moderate torque to tighten the femoral screw to the femoral component and the stem/offset adaptor. 34 I nstruments Driver Handle 9403-1302-RA Screw Driver Adaptor 9403-5331-RA